Standard_two_plate_injection_molding_tool.jpg
No higher resolution available.
Summary
| Description |
English:
Standard two plate injection molding tool. Cavity and Core are insert in the mold base. The cavity and core are spark eroded into the shape that is required. Two plates - The two blocks you see. Five cavities - There are five cavities that will mold five different parts.
Deutsch:
Standard Zweiplattenspritzgusswerkzeug. Familien-Werkzeug zum Spritzen von fünf verschiedenen Teilen in einem Zyklus.
|
| Date | 17 January 2007 (original upload date); 23 May 2006 (last version) |
| Source | Transferred from en.wikipedia to Commons by Sebastian Wallroth using CommonsHelper . |
| Author | Britiju at English Wikipedia / |
Licensing
|
This work has been released into the
public domain
by its author,
Britiju
at
English Wikipedia
. This applies worldwide.
In some countries this may not be legally possible; if so: Britiju grants anyone the right to use this work for any purpose , without any conditions, unless such conditions are required by law. |
Original upload log
The original description page was
here
. All following user names refer to en.wikipedia.
- 2007-01-17 03:21 Britiju 496×375× (40390 bytes) Standard two plates Injection nolding tool. "Family mold" with 5 different parts. Cavity and core as inserts in the mold base.
- 2007-01-17 03:13 Britiju 496×375× (40390 bytes)
- 2007-01-17 03:13 Britiju 496×375× (59103 bytes)
- 2007-01-17 03:02 Britiju 496×375× (40737 bytes)
- 2006-05-23 17:19 Ehsankiani 640×480× (147961 bytes) An injection molding die (both male and female pieces) used for makeing auto indicator lamps. Photo taken by Ehsan Kiani