Seikan_Tunnel_3d_cross_section_1a.svg
Size of this PNG preview of this SVG file:
567 × 390 pixels
.
Other resolutions:
320 × 220 pixels
|
640 × 440 pixels
|
1,024 × 704 pixels
|
1,280 × 880 pixels
|
2,560 × 1,761 pixels
.
Summary
A sketch (not to scale) of a typical cross section of the Seikan Tunnel , an underwater railway tunnel in Japan.
Inspiration provided by: Morse, p52, bottom figure [1] & Paulson, figure 8. [2]
- (1) : Main tunnel. 11-11.4 metres wide. Horseshoe shape shown, but a circular cross section was used in areas with difficult geology.
- (2) : Service tunnel. 4-5 metres wide. Sprayed concrete thickness 0.12-0.15 m. Horizontally, the service tunnel is located 30 m away from the main tunnel (centrelines)
- (3) : Pilot tunnel. 3.6-5 metres wide. Sprayed concrete thickness 0.12-0.15 m. The depth of the pilot tunnel varies between 0 and 118 metres below the floor of the service tunnel. In the middle of the Tsugaru Strait the pilot tunnel was not constructed. Horizontally, the pilot tunnel is located 15 m from both the service and main tunnels (centrelines) - in between.
- (4) : Connecting galley. Located at intervals of approximately 600m.
References
- ↑ Morse, D. (May 1988). "Japan Tunnels Under the Ocean". Civil Engineering 58 (5): 50-53.
- ↑ Paulson, B. (1981). "Seikan Undersea Tunnel". American Society of Civil Engineers, Journal of the Construction Division 107 (3): 509-525.
Licensing
I, the copyright holder of this work, hereby publish it under the following licenses:
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License , Version 1.2 or any later version published by the Free Software Foundation ; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License . http://www.gnu.org/copyleft/fdl.html GFDL GNU Free Documentation License true true |
|
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license. | |
|
||
This licensing tag was added to this file as part of the GFDL licensing update . http://creativecommons.org/licenses/by-sa/3.0/ CC BY-SA 3.0 Creative Commons Attribution-Share Alike 3.0 true true |
This file is licensed under the
Creative Commons
Attribution-Share Alike
2.5 Generic
,
2.0 Generic
and
1.0 Generic
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
You may select the license of your choice.