Parts_and_tools_to_convert_an_Apeks_first_stage_diving_regulator_from_DIN_to_Yoke_connector_P1240152.jpg
Size of this preview:
800 × 600 pixels
.
Other resolutions:
320 × 240 pixels
|
640 × 480 pixels
|
1,024 × 768 pixels
|
1,280 × 960 pixels
|
2,560 × 1,920 pixels
|
4,000 × 3,000 pixels
.
Summary
Description Parts and tools to convert an Apeks first stage diving regulator from DIN to Yoke connector P1240152.jpg |
English:
Parts and tools to convert an Apeks first stage diving regulator from DIN to Yoke connector. The regulator gas a DIN connection fitted, which needs an Allen key to remove, the yole is shown ready to attach , with a 19mm ring spanner to tighten
|
Date | |
Source | Own work |
Author | Peter Southwood |
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the
Creative Commons
Attribution-Share Alike 4.0 International
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.