Fans_from_computer_case_-_front_and_back_-_2018-05-22.jpg
Size of this preview:
400 × 600 pixels
.
Other resolutions:
160 × 240 pixels
|
320 × 480 pixels
|
512 × 768 pixels
|
682 × 1,024 pixels
|
1,365 × 2,048 pixels
|
4,032 × 6,048 pixels
.
Summary
Description Fans from computer case - front and back - 2018-05-22.jpg |
English:
Two fans installed by default on the
computer case
be quiet
BG021. The smallest 12cm fan running at 1200 rpm is located at the back of the case to extract the air from the processor whose the
air cooling
is close. It can not be bigger because it has to share the backspace with the outputs of the
motherboard
. The largest 14cm fan rotating at 900 rpm is located on the front panel and will suck outside air to inject it into the case. By rotating faster the smaller fan will allow a flow comparable to the largest, it allows to have a balance between the air drawn and extracted from the case for optimal ventilation.
Français :
Deux ventilateurs installés par défaut sur le
boitier d'ordinateur
be quiet BG021. Le plus petit ventilateur de 12cm tournant à 1200 tr/min est situé à l'arrière du boitier pour extraire l'air du processeur donc le
ventirad
est proche. Il ne peut pas être plus grand car il doit partager l'espace arrière avec les sorties de la
carte mère
. Le plus grand ventilateur de 14cm tournant à 900 tr/min est situé sur la façade avant et va aspirer de l'air extérieur pour l'injecter dans le boitier. En tournant plus rapidement le plus petit ventilateur va permettre d'avoir un débit comparable au plus grand, cela permet d'avoir un équilibre entre l'air aspiré et extrait du boitier pour obtenir une ventilation optimale.
|
Date | |
Source | Own work |
Author | Bretwa |
Licensing
I, the copyright holder of this work, hereby publish it under the following license:
This file is licensed under the
Creative Commons
Attribution-Share Alike 4.0 International
license.
-
You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
-
Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.