This simple coat of arms image could be re-created using vector graphics as an SVG file . This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{ vector version available | new image name }} . It is recommended to name the SVG file “82AirborneDiv2BdeSTBFlash.svg”—then the template Vector version available (or Vva ) does not need the new image name parameter.

This simple coat of arms image was uploaded in the JPEG format even though it consists of non-photographic data . This information could be stored more efficiently or accurately in the PNG or SVG format. If possible, please upload a PNG or SVG version of this image without compression artifacts , derived from a non-JPEG source (or with existing artifacts removed ). After doing so, please tag the JPEG version with {{Superseded|NewImage.ext}} and remove this tag. This tag should not be applied to photographs or scans. If this image is a diagram or other image suitable for vectorisation , please tag this image with {{Convert to SVG}} instead of {{BadJPEG}} . If not suitable for vectorisation, use {{Convert to PNG}} . For more information, see {{BadJPEG}} .

Description 82AirborneDiv2BdeSTBFlash.jpg	Special Troops Battalion/2/82nd Airborne Division
Date	23 February 2006
Source	US Army Institute Of Heraldry
Author	US Army
Permission ( Reusing this file )	Public domain Public domain false false This image shows a flag , a coat of arms , a seal or some other official insignia produced by the United States Army Institute of Heraldry . It is in the public domain but its use is restricted by Title 18, United States Code, Section 704 [1] and the Code of Federal Regulations (32 CFR, Part 507) [2] , [3] . Permission to use these images in the USA for most commercial purposes must be obtained from The Institute of Heraldry prior to their use. Deutsch ∙ English ∙ فارسی ∙ 日本語 ∙ русский ∙ +/−

Summary

• A blue shield-shaped embroidered device with a semi-circular base 2 1/4 inches (5.72 cm) in height by 1 7/8 inches (4.76 cm) in width overall, edged with a 1/8 inch (.32 cm) white border divided horizontally by a 1/2 inch (1.27 cm) white stripe.

Background

1. The beret flash was approved on 23 February 2006.
2. It was amended to correct the unit designation on 20 March 2006