Āryabhaṭa numeration

Aryabhata used Devanagari letters for numbers, very similar to the Greek numerals, even after the invention of Indian numerals. The values of the different forms of ख are:^[1]

• ख [kə] = 2 (२)
• खि [kɪ] = 200 (२००)
• खु [kʊ] = 20,000 (२० ०००)
• खृ [kri] = 2,000,000 (२० ०० ०००)
• खॢ [klə] = 2×10⁸ (२×१०^८)
• खे [ke] = 2×10¹⁰ (२×१०^१०)
• खै [kɛː] = 2×10¹² (२×१०^१२)
• खो [koː] = 2×10¹⁴ (२×१०^१४)
• खौ [kɔː] = 2×10¹⁶ (२×१०^१६)

Brahmi Kha

The Brahmi letter , Kha, is probably derived from the Aramaic Qoph , and is thus related to the modern Latin Q and Greek Koppa. Several identifiable styles of writing the Brahmi Kha can be found, most associated with a specific set of inscriptions from an artifact or diverse records from an historic period.^[2] As the earliest and most geometric style of Brahmi, the letters found on the Edicts of Ashoka and other records from around that time are normally the reference form for Brahmi letters, with vowel marks not attested until later forms of Brahmi back-formed to match the geometric writing style.

More information Ashoka (3rd-1st c. BCE), Girnar (~150 BCE) ...

Brahmi Kha historic forms

Ashoka (3rd-1st c. BCE)	Girnar (~150 BCE)	Kushana (~150-250 CE)	Gujarat (~250 CE)	Gupta (~350 CE)

Close

Tocharian Kha

The Tocharian letteris derived from the Brahmi , but does not have an alternate Fremdzeichen form.

More information Khā, Khi ...

Tocharian Kha with vowel marks

Kha	Khā	Khi	Khī	Khu	Khū	Khr	Khr̄	Khe	Khai	Kho	Khau	Khä

Close

Kharoshthi Kha

The Kharoshthi letter is generally accepted as being derived from the Aramaic Qoph , and is thus related to Q and Koppa, in addition to the Brahmi Kha.

Devanagari-using Languages

In all languages, ख is pronounced as [kʰə] or [kʰ] when appropriate. Because of borrowings from languages with different phonemic inventories, Devanagari has employed the nukta to create an additional related letter ख़ ḫa that is pronounced as /x/ and can be used to retain non-native distinctions in Hindi texts.

Conjuncts With ख

Devanagari exhibits conjunct ligatures, as is common in Indic scripts. Like most Devanagari letters, in modern texts ख forms very few irregular ligatures, and assumes a half form to create most conjuncts, such as ख् + य = ख्य.^[3] Earlier texts show many more ligature forms, with vertically stacked conjuncts being common. The use of modern ligatures and vertical conjuncts may vary across languages using the Devanagari script, with Marathi in particular preferring the use of half forms where texts in other languages would show ligatures and vertical stacks.

খ in Bengali-using languages

খ is used as a basic consonant character in all of the major Bengali script orthographies, including Bengali and Assamese.

Conjuncts with খ

Bengali খ does not exhibit any irregular conjunct ligatures, beyond adding the standard trailing forms of ব, য ya-phala, and র ra-phala, and the leading repha form of র.^[4]

• খ্ (kʰ) + ব (va) gives the ligature খ্ব (kʰva), with the va phala suffix:

• খ্ (kʰ) + য (ya) gives the ligature খ্য (kʰya), with the ya phala suffix:

• খ্ (kʰ) + র (ra) gives the ligature খ্র (kʰra), with the ra phala suffix:

• ঙ (ng) + খ (kʰa) gives the ligature ঙ্খ (ngkʰa):

• র্ (r) + খ (kʰa) gives the ligature র্খ (rkʰa), with the repha prefix:

• র্ (r) + খ্ (kʰ) + য (ya) gives the ligature র্খ্য (rkʰya), with the repha prefix and ya phala suffix:

• স্ (s) + খ (kʰa) gives the ligature স্খ (skʰa):

Gujarati-using Languages

The Gujarati script is used to write the Gujarati and Kutchi languages. In both languages, ખ is pronounced as [kʰə] or [kʰ] when appropriate. Like all Indic scripts, Gujarati uses vowel marks attached to the base consonant to override the inherent /ə/ vowel:

Conjuncts with ખ

Gujarati ખ exhibits conjunct ligatures, much like its parent Devanagari Script. Most Gujarati conjuncts can only be formed by reducing the letter shape to fit tightly to the following letter, usually by dropping a character's vertical stem, sometimes referred to as a "half form". A few conjunct clusters can be represented by a true ligature, instead of a shape that can be broken into constituent independent letters, and vertically stacked conjuncts can also be found in Gujarati, although much less commonly than in Devanagari. True ligatures are quite rare in Indic scripts. The most common ligated conjuncts in Gujarati are in the form of a slight mutation to fit in context or as a consistent variant form appended to the adjacent characters. Those variants include Na and the Repha and Rakar forms of Ra.

• ખ્ (kʰ) + ર (ra) gives the ligature KhRa:

• ર્ (r) + ખ (kʰa) gives the ligature RKha:

• ખ્ (kʰ) + ન (na) gives the ligature KhNa:

Conjuncts of ଖ

As is common in Indic scripts, Odia joins letters together to form conjunct consonant clusters. The most common conjunct formation is achieved by using a small subjoined form of trailing consonants. Most consonants' subjoined forms are identical to the full form, just reduced in size, although a few drop the curved headline or have a subjoined form not directly related to the full form of the consonant. The second type of conjunct formation is through pure ligatures, where the constituent consonants are written together in a single graphic form. This ligature may be recognizable as being a combination of two characters or it can have a conjunct ligature unrelated to its constituent characters.

• ଙ୍ (ŋ) + ଖ (kʰa) gives the ligature ŋkʰa:

• ର୍ (r) + ଖ (kʰa) gives the ligature rkʰa:

• ଖ୍ (kʰ) + ର (ra) gives the ligature kʰra:

Conjuncts of ഖ

As is common in Indic scripts, Malayalam joins letters together to form conjunct consonant clusters. There are several ways in which conjuncts are formed in Malayalam texts: using a post-base form of a trailing consonant placed under the initial consonant of a conjunct, a combined ligature of two or more consonants joined together, a conjoining form that appears as a combining mark on the rest of the conjunct, the use of an explicit candrakkala mark to suppress the inherent "a" vowel, or a special consonant form called a "chillu" letter, representing a bare consonant without the inherent "a" vowel. Kha does not exhibit ligation in conjuncts with other letters, does not have a chillu (bare consonant) form, and uses the explicit virama unless coupled with the normal post-base and repha consonant forms. Texts written with the modern reformed Malayalam orthography, put̪iya lipi, may favor more regular conjunct forms than older texts in paḻaya lipi, due to changes undertaken in the 1970s by the Government of Kerala.

• ഖ് (kʰ) + ര (ra) gives the ligature kʰra:

Kho Khai

In the acrophony of the Thai script, khai (ไข่) means ‘egg’. Kho khai corresponds to the Sanskrit character ‘ख’.

Kho Khuat

In the acrophony of the Thai script, khuat (ขวด) means ‘bottle’. Kho khuat (ฃ) represents the voiceless velar fricative sound /x/ that existed in Old Thai at the time the alphabet was created but no longer exists in Modern Thai. When the Thai script was developed, the voiceless velar fricative sound did not have a Sanskrit or Pali counterpart so the character kho khai was slightly modified to create kho khuat. During the Old Thai period, this sound merged into the aspirated stop /kʰ/, and as a result the use of this letters became unstable. Although kho khuat is now obsolete, it remains in dictionaries, preserving the traditional count of 44 letters in the Thai alphabet. When the first Thai typewriter was developed by Edwin Hunter McFarland in 1892, there was simply no space for all characters, thus kho khuat was of the two letters left out along with kho khon.^[5] Although kho khuat does not appear in modern Thai orthography, some writers and publishers are trying to reintroduce its usage.

High Kha

Like in other Indic scripts, Tai Tham consonants have the inherent vowel "a", and take one of several modifying vowel signs to represent syllables with another vowel.

Notes:

1. The transliteration scheme is an amalgamation of the ALA-LC schemes of Khmer^[6], Pali^[7] and Lao^[8].
2. Many of the matras include subscript wa (), subscript ya (), subscript a () or even the letter a () itself. Anusvara () and visarga () are also used.
3. In the relevant Tai languages, a short vowel in an open syllable includes an underlyinɡ ɡlottal stop.

Additional short vowels not shown above may be synthesised from the corresponding long vowel by appending visarga for open syllables (as shown for Kho) or applying mai sat () for closed syllables (as shown for Kho̹). Unlike the other languages, Lao instead replaces an ī or ư̄ glyph by the corresponding short vowel.

The lack of a vowel between consonants notated as consonants is indicated by vertically stacking the consonants, generally without their touching. The Brahmi style of writing final consonants small and low developed, as vestigially seen in Khmer and Lao, into using subscripting to indicate that a consonant had no vowel of its own. In theory this leaves it ambiguous as to whether a consonant precedes or follows the vowel, but ambiguous cases are rare. Finally, if there is no room for the consonant below, it may be left as an 'independent' consonant or. in some cases, written superscript. Occasionally the visible virama (ra haam) is used, but this may signify that the consonant so marked is silent. The vowel /a/ will be made explicit if the final consonant is notated by a letter and is included in the same stack as the initial consonant or is written in a stack just consisting of that consonant.

Kha can serve as the initial consonant of a stack, and several examples can be seen above. It can also occur as the final element of a consonant stack in words of Indic origin, both in the cluster kkh of the word Pali word ᨾᩮᩣᨠ᩠ᨡ mokkha 'release' and as the final consonant after apocation of the final vowel, e.g. ᩃᩮ᩠ᨡ lekh 'number'.

High Khha

Like in other Indic scripts, Tai Tham consonants have the inherent vowel "a", and take one of several modifying vowel signs to represent syllables with another vowel.

Notes:

1. The transliteration scheme is an amalgamation of the ALA-LC schemes of Khmer^[6], Pali^[9] and Lao^[10].
2. Many of the matras include subscript wa (), subscript ya (), subscript a () or even the letter a () itself. Anusvara () and visarga () are also used.
3. In the relevant Tai languages, a short vowel in an open syllable includes an underlyinɡ ɡlottal stop.

Additional short vowels not shown above may be synthesised from the corresponding long vowel by appending visarga for open syllables (as shown for K͟ho) or applying mai sat () for closed syllables (as shown for K͟ho̹). Unlike the other languages, Lao instead replaces an ī or ư̄ glyph by the corresponding short vowel.

The lack of a vowel between consonants notated as consonants is indicated by vertically stacking the consonants, generally without their touching. The Brahmi style of writing final consonants small and low developed, as vestigially seen in Khmer and Lao, into using subscripting to indicate that a consonant had no vowel of its own. In theory this leaves it ambiguous as to whether a consonant precedes or follows the vowel, but ambiguous cases are rare. Finally, if there is no room for the consonant below, it may be left as an 'independent' consonant or. in some cases, written superscript. Occasionally the visible virama (ra haam) is used, but this may signify that the consonant so marked is silent. The vowel /a/ will be made explicit if the final consonant is notated by a letter and is included in the same stack as the initial consonant or is written in a stack just consisting of that consonant.

This form occurs only as the initial consonant of a consonant stack.

Conjuncts of 𑂎

As is common in Indic scripts, Kaithi joins letters together to form conjunct consonant clusters. The most common conjunct formation is achieved by using a half form of preceding consonants, although several consonants use an explicit virama. Most half forms are derived from the full form by removing the vertical stem. As is common in most Indic scripts, conjucts of ra are indicated with a repha or rakar mark attached to the rest of the consonant cluster. In addition, there are a few vertical conjuncts that can be found in Kaithi writing, but true ligatures are not used in the modern Kaithi script.

• 𑂎୍ (kʰ) + 𑂩 (ra) gives the ligature kʰra:

• 𑂩୍ (r) + 𑂎 (kʰa) gives the ligature rkʰa: