Tennessee_State_Route_28
Tennessee State Route 28
State highway in Tennessee, United States
State Route 28 (SR 28) is a state highway in the state of Tennessee, traversing the state in a north–south axis from south of Jasper to the Kentucky state line at Static.[2]
SR 28; primary in red, unsigned in green | ||||
| Route information | ||||
| Maintained by TDOT | ||||
| Length | 132.37 mi (213.03 km) | |||
| Existed | October 1, 1923[1]–present | |||
| Major junctions | ||||
| South end |  I-24 at Jasper | |||
| Major intersections | ||||
| North end |   US 127 / SR 111 at Static, Tennessee and the Kentucky state line | |||
| Location | ||||
| Country | United States | |||
| State | Tennessee | |||
| Counties | Marion, Sequatchie, Bledsoe, Cumberland, Fentress, Pickett | |||
| Highway system | ||||
| ||||
Marion County
SR 28 begins just south of Jasper at an interchange with I-24/SR 27 (Exit 155) in Marion County. It then goes north as a 4-lane divided highway to have an interchange with US 41/US 64/US 72/SR 2, where it becomes concurrent with US 41, in Jasper before bypassing downtown to the east and continuing north and narrowing to a 2-lane. Between both of the aforementioned interchanges, SR 28 has an unsigned concurrency with SR 27. The highway then has an intersection with unsigned SR 150, where US 41 splits off, before leaving Jasper and continuing north. It then travels up the Sequatchie Valley, parallel to the Sequatchie River, and passes through Sequatchie, where it crosses the Little Sequatchie River, before entering Whitwell at an intersection with SR 283. It then has an intersection with SR 108 before going through downtown and leaving Whitwell to go down a long, narrow valley full of farmland. SR 28 then crosses into Sequatchie County.
Sequatchie County
SR 28 then goes north to leave the Sequatchie River before it enters Dunlap and has a y-intersection with US 127/SR 8. From this point on, SR 28 is the unsigned companion route of US 127 from Dunlap to the state line at Static. US 127/SR 8/SR 28 then go north through downtown to an interchange with SR 111, with SR 8 splitting off here to go west on SR 111. US 127/SR 28 then go through some farmland before entering Bledsoe County.
Bledsoe County
The highway now passes through Palio, Lusk, and Lees Station before entering Pikeville at an intersection with SR 30. They then become concurrent with each other to bypass downtown as a 4-Lane undivided highway before splitting off to the west, with US 127/SR 28 narrowing back to 2-lanes and continuing north through farmland to pass through Cold Spring and Melvine before pulling away from the Sequatchie River and ascending onto the Cumberland Plateau and entering Cumberland County.
Cumberland County
US 127/SR 28 immediately have an intersection with Vandever Road, which is a connector to SR 282 and Lake Tansi Village. They then go through more farmland before passing by Cumberland Mountain State Park and having an intersection with SR 419. The highway now passes through Cumberland Homesteads, where it has a y-intersection with SR 68, and US 127/SR 28 turn northeast to enter Crossville. US 127/SR 28 intersect SR 392 (a beltway around downtown) before entering downtown and having an intersection with US 70/SR 1/SR 101. They then pass through downtown before widening to a 4-lane and junctioning with SR 298. US 127/SR 28 then have an intersection with US 70N/SR 24 before going through Crossville's main business district before crossing the Obed River and coming to an interchange with I-40 (Exit 317). US 127/SR 28 then leave Crossville, narrowing to 2-lanes, and continue north through more farmland. They then cross into Fentress County via a couple of sharp switchbacks, in order to negotiate a bridge over Clear Creek.
Fentress County
US 127/SR 28 then go through more farmland before entering Clarkrange to have an intersection with SR 62. US 127/SR 28 then passes through Clarkrange before having an intersection with SR 85 and entering Grimsley. They then pass through Grimsley before widening to a 4-lane to pass by Jamestown Municipal Airport and intersect SR 296 west of Allardt. They then enter Jamestown and bypass downtown (beginning with the intersection with Main Street (Old US 127/SR 28) to the east and have an interchange with SR 52 before having one with SR 154. They then leave Jamestown, at the other end of Main Street (Old US 127/SR 28), and continue north and narrowing to a 2-lane. They then pass through Sgt. Alvin C. York State Historic Park and Pall Mall, where the highway crosses the Wolf River and has an intersection with Caney Creek Road (connector to Kentucky Route 200), before crossing into Pickett County.
Pickett County
The highway winds it way through rural areas for several miles to intersect with SR 325, and then SR 295, before entering Static and intersecting both Kentucky Route 1076 and SR 111 immediately before crossing the state line into Kentucky, with SR 28 ending here and US 127 continuing into Kentucky.[2][3]
In December 2021, SR 28's course from Jasper to Crossville was designated the Sequatchie Valley Scenic Byway, part of the National Scenic Byway system.[4]
| County | Location | mi | km | Destinations | Notes |
|---|---|---|---|---|---|
| Marion | Jasper | 0.0 | 0.0 | I-24 (SR 27 east) – Nashville, Chattanooga | I-24 exit 155 |
    US 41 south / US 64 / US 72 (Main Street/SR 2/SR 27 west) – Kimball, Haletown | Interchange; northern end of unsigned SR 27 concurrency; southern end of US 41 concurrency | ||||
 US 41 north (SR 150 north) – Tracy City | Southern terminus of unsigned SR 150; northern end of US 41 concurrency | ||||
| Whitwell |  SR 283 north – Powells Crossroads | Southern terminus of SR 283 | |||
 SR 108 north (S Main Street) – Palmer, Gruetli-Laager | Southern terminus of SR 108 | ||||
| Sequatchie | Dunlap | US 127 south (Rankin Avenue/SR 8 south) – Fairmount, Walden, Signal Mountain | Y-Intersection; southern end of US 127/SR 8 concurrency; SR 28 becomes unsigned | ||
 SR 8 north / SR 111 – Cookeville, Chattanooga | Interchange; northern end of SR 8 concurrency | ||||
| Bledsoe | Pikeville |   SR 30 east – Dayton | Southern end of SR 30 concurrency | ||
 SR 30 west – Spencer, Fall Creek Falls State Park | Northern end of SR 30 concurrency | ||||
| Cumberland | | Vandever Road to  SR 282 – Lake Tansi Village | Connector to SR 282 and Lake Tansi Village | ||
| Cumberland Homesteads |  SR 419 north (Pigeon Ridge Road) – Cumberland Mountain State Park | Southern terminus of SR 419 | |||
 SR 68 south – Spring City | Northern terminus of SR 68 | ||||
| Crossville |  SR 392 (Miller Avenue) | Beltway around downtown Crossville | |||
  US 70 / SR 101 (Lantana Road/SR 1) – Sparta, Lake Tansi Village, Fairfield Glade, Crab Orchard | |||||
   SR 298 north (Genesis Road) to I-40 | Southern terminus of SR 298 | ||||
| SR 392 south (Miller Avenue) | Northern terminus of SR 392; beltway around downtown Crossville | ||||
 US 70N west (Elmore Road/SR 24 west) – Monterey | Eastern terminus of US 70N and unsigned SR 24 | ||||
 SR 462 south (Northside Drive/Interstate Drive) | Northwest Connector | ||||
| I-40 – Knoxville, Nashville | I-40 Exit 317 | ||||
| Fentress | Clarkrange |  SR 62 (Clarkrange Highway/Deer Lodge Highway) – Monterey, Wartburg | |||
| Grimsley |  SR 85 west (Wilder Road) – Livingston | Eastern terminus of SR 85 | |||
| |  SR 296 east (Taylor Place Road) – Allardt | Western terminus of SR 296 | |||
| Jamestown | Old U.S. 127 (South Main Street) | ||||
 SR 52 (East Central Avenue/Allardt Highway) – Jamestown, Allardt, Rugby | Interchange | ||||
 SR 154 (Pickett Parks Highway) – Jamestown, Pickett State Park, Big South Fork National River and Recreation Area, Monticello, KY | Interchange | ||||
| Old US 127 (North York Highway, North Main Street) | |||||
| Pall Mall | Caney Creek Road to  KY 200 – Monticello | Caney Creek Road becomes KY 200 at the state line | |||
| Pickett | |  SR 325 west (Red Hill Road) – Byrdstown | Eastern terminus of SR 325 | ||
| |  SR 295 west (Parker Road) – Byrdstown | Eastern terminus of SR 295 | |||
| Static |  KY 1076 north | Intersection right on the state line; southern terminus of KY 1076 | |||
| 132.37 | 213.03 | SR 111 south – Livingston, Byrdstown US 127 north – Albany, Jamestown | Northern terminus of unsigned SR 28 and SR 111 on the state line; US 127 continues north into Kentucky | ||
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
| |||||
- Highway Planning Survey Division (1925). Biennial Report of the Commissioner of the Department of Highways and Public Works State of Tennessee for the Years 1923 and 1924 (PDF) (Report). Nashville: Tennessee Department of Highways and Public Works. pp. 39–44. Retrieved May 19, 2023.
- DeLorme (2004). Tennessee Atlas & Gazetteer (Map). Yarmouth, ME: DeLorme.[full citation needed]
- Tennessee Department of Transportation (2015). Official Tennessee Highway Map (Map). Nashville: Tennessee Department of Transportation.[full citation needed]
- "Sequatchie Valley Scenic Byway". America's Byways. Federal Highway Administration. Retrieved December 14, 2022.