Rover_T3

Rover T3

Rover T3

Gas turbine-powered coupé


Rover T3 is a gas turbine-powered coupé developed in the 1950s by the Rover Company. Showcasing Britain's leading role in the development of this new technology, the Rover T3 was launched at the Earls Court Motor Show in November 1956 (stand 153).[1][2][3], which was captured on film by British Pathé.[4] The T3 coupé was Rover’s third turbine car, designed by Charles Spencer King and Gordon Bashford.

Quick Facts Overview, Manufacturer ...

Background

Rover had begun developing gas turbine passenger vehicles after World War II. Their first attempt was Rover JET1, a two-seater convertible from 1949/50.[5]

Engine

The modified Rover 2S/100 gas turbine has a single combustion chamber and a single centrifugal compressor which rotates at up to a maximum of 52,000 rpm.[6] A free turbine drives the output shaft, separate from the compressor turbine. The T3 retained the two pedal operation from the JET1 prototype - one pedal to accelerate and one to brake.[7]

The engine is rated at 110bhp and capable of 100mph (161 km/h).[8][9]

Body

The chassis incorporates four-wheel-drive and De Dion tube rear suspension and all around inboard Dunlop disk brakes.[7] The fully-developed T3 carries a blue glass-fibre coupé body.

Rover T3 (rear view)

Survival today

The Rover T3 became part of the BMIHT collection and in recent years has been on display at the British Motor Museum, Gaydon.

Rover T3 base unit

The Rover T3 base unit is a gas turbine-powered development mule, developed in the early 1950s by the Rover Company. It was the engineering test car for the 1956 T3 coupé, Rover’s third turbine car.

Essentially mechanically identical to the finished coupé, its simple body allowed for the easy change of turbine units and other components. The chassis incorporates four-wheel-drive and De Dion tube rear suspension, clothed in a rudimentary steel panel body. Perhaps surprising for an engineering test mule, the vehicle has luxurious blue leather seats.

The Rover T3 base unit was stored for over 50 years after engineering development work had been completed in the 1960s[10]

During 2018, restoration began by the same dedicated team of volunteers that worked on the Rover-BRM. The T3 base unit was first demonstrated at the Museum's Gaydon Gathering event in August 2022.

See also


References

  1. "The cars at Earls Court". 7 July 2014.
  2. "Members Newsletter" (PDF). British Motor Museum. October 2022. Retrieved 28 September 2023.

Share this article:

This article uses material from the Wikipedia article Rover_T3, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.