Mitsubishi_4B4_engine

Mitsubishi 4B4 engine

Mitsubishi 4B4 engine

Reciprocating internal combustion engine


The Mitsubishi 4B4 engine is the newest all-alloy inline four-cylinder engines from Mitsubishi Motors, based on the 4A9 engine from 2004. But in terms of performance it can replace the bigger 4B1 engine.

Quick Facts Overview, Manufacturer ...

Engine family characteristics

This new engine was developed in order to satisfy new performance, weight and ecological standards. It is derived from the older 4A91 engine. The cars that employ this engine demonstrate fall mainly in the middle of the pack of city SUVs and CUVs. Peak torque arrives at an unusually low 1800 rpm and maintains a flat plateau up to 4500 rpm.

4B40

Specifications

Engine type Inline turbo/intercooled 4-cylinder DOHC 16v MIVEC
Displacement 1.5 L
Bore x Stroke 75 mm × 84.8 mm (2.95 in × 3.34 in)
Compression ratio 10.0:1
Fuel system Direct Injection (high pressure), port injection (low pressure). System has a normal fuel pump that feeds a shared fitting on the high pressure pump. One line off the fitting feeds the port injector fuel rail, then feeds the low pressure side of the high pressure pump. Both fuel rails are return-less with the high pressure fuel rail ending with a pressure sensor.
Peak power 120 kW (161 hp) at 5500 rpm
Peak torque 250 N⋅m (184 lb⋅ft) at 1800 to 4500 rpm

Applications

See also


References

  1. "Mitsubishi Motors Starts Sales of the All-New Outlander in China" (Press release). Tokyo, Japan: Mitsubishi Motors. 2022-11-21. Retrieved 2023-01-01.

Share this article:

This article uses material from the Wikipedia article Mitsubishi_4B4_engine, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.