Idaho_State_Highway_200

Idaho State Highway 200

Idaho State Highway 200

State highway in Bonner County, Idaho, United States


State Highway 200 (SH-200) is an east–west state highway in northern Idaho, United States. It travels along the north side of Lake Pend Oreille and the Clark Fork River between the Sandpoint area and the Montana border, where it continues as Montana Highway 200. The highway is also a national scenic byway that is named the Pend Oreille Scenic Byway.[3] This state highway is part of a continuous chain of similarly numbered state highways that stretch approximately 1,356 miles (2,182 km) from Minnesota to Idaho.

Quick Facts State Highway 200, Route information ...

Route description

Idaho SH-200 starts at a junction with U.S. Highway 95 in Ponderay, a small community north of Sandpoint. The highway heads eastward along the north shores of lake Pend Oreille at the very feet of the Cabinet Mountains with several turnouts and scenic overlooks. After the town of Clark Fork it then enters the Clark Fork River Valley following the Clark Fork River and ends at the Montana border just before Heron, MT where it becomes Montana Highway 200.

The road passes through the towns of Ponderay, Kootenai, Hope, East Hope, and Clark Fork.

ID-200 is the westernmost portion of a chain of Highway 200s which extends east through Montana, North Dakota, and Minnesota. At only 33 miles (53 km) in length, Idaho's Highway 200 is the shortest in the chain while Montana's Highway 200 is the longest. There is another highway called SR 20 in Washington that would complete the chain of Hwy 200s, but ID-200 is no longer directly connected to WA-20.[citation needed]

History

SH-200 was originally part of the National Parks Highway, a national auto trail created in the early 20th century to connect various national parks.[4] In the 1930s, it was designated as State Highway 3, corresponding with the Montana highway's number.[5] From 1941 to 1967, the route was signed as part of U.S. Route 10A.[6] After that highway's decommissioning, Idaho State Highway 200 was created in 1968 to replace it as part of a multi-state effort to renumber highways on the SpokaneDuluth corridor to the same number.[7] By 2007, the portion of Highway 200 west of the US 2/95 intersection had been terminated. Mileposts still display its pre-2007 length.

Major intersections

The entire route is in Bonner County.

More information Location, mi ...

Business route

Quick Facts State Highway 200 Business, Location ...

State Highway 200 Business (SH-200 BUS) is a business route of Highway 200 that runs through Hope, Idaho. It follows the former route of US 10A.

See also


References

  1. Idaho Transportation Department (January 29, 2008). "Milepost Log". Archived from the original on December 13, 2012. Retrieved 2008-04-28.
  2. Geological Survey (U.S.); Gerlach, Arch C. (1970). The national atlas of the United States of America (Map). United States: Geological Survey (U.S.). p. 35. Retrieved October 29, 2020.{{cite map}}: CS1 maint: multiple names: authors list (link)
  3. Rand McNally Official 1926 Auto Road Map, Idaho (Map). Rand McNally. 1926. Retrieved November 25, 2021 via Idaho State Archives.
  4. Bureau of Highways Map of the State of Idaho Showing State Highways and Connecting Roads, 1936 (Map). Idaho Bureau of Highways. 1936. Retrieved November 25, 2021 via Idaho State Archives.
  5. Idaho Department of Highways; Rand McNally & Co. (1967). Official Highway Map of Idaho (Map). c. 1:1,425,600. Boise: Idaho Department of Highways. Retrieved October 28, 2020 via Flickr.
  6. "Montana Highway To Get New Number". The Billings Gazette. Associated Press. October 19, 1967. p. 21. Retrieved November 26, 2021 via Newspapers.com.
KML is from Wikidata

Share this article:

This article uses material from the Wikipedia article Idaho_State_Highway_200, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.