Infrared Control Freak 360 (IRCF360) is a 360-degree proximity sensor and a motion sensing devices, developed by ROBOTmaker. The sensor is in BETA developers release as a low cost (software configurable) sensor for use within research, technical and hobby projects.

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. (November 2018) The topic of this article may not meet Wikipedia's notability guidelines for products and services. (November 2018) This article may be too technical for most readers to understand. (April 2012)

Quick Facts Developer, Type ...

Infrared Control Freak

Infrared Control Freak (IRCF360) - Beta
Developer	ROBOTmaker
Type	Proximity sensor / Motion Sensor / Human interface device
Release date	1 March 2012; 12 years ago (2012-03-01)[1]
CPU	Microchip PIC16F88 8 MHz internal oscillator, 200 nanosecond instruction execution, 35 single word instructions, CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® architecture into an 18-pin package, a capture/compare/PWM, an Addressable USART, (I²C™) bus, 10-bit Analog-to-Digital (A/D) converter and 2 Comparators.[2]
Memory	256 bytes of EEPROM data memory bytes
Power	0.5 W (model A)
Website	www.robotmaker.eu

Close

The 360-degree sensor was originally designed as a short range micro robot proximity sensor and mainly intended for Swarm robotics, Ant robotics, Swarm intelligence, autonomous Qaudcopter, Drone, UAV, multi-robot simulations e.g. Jasmine Project^[3] where 360 proximity sensing is required to avoid collision with other robots and for simple IR inter-robot communications.

To overcome certain limitation with Infra-red (IR) proximity sensing (e.g. detection of dark surfaces) the sensing module includes ambient light sensing and basic tactile sensing functionality during forward movement sensing/probing providing photovore and photophobe robot swarm behaviours and characteristics.

A project named Sensorium Project was started aimed at broadening the Sensors audience beyond its typical robot sensor usage. To demonstrate the sensor's functionality, opensource Java based Integrated Development Environments (IDE) are used, such as Arduino and Processing (programming language).