Foaming_agent

Foaming agent

Foaming agent

Substance that facilitates the formation of foam

A foaming agent is a material such as a surfactant or a blowing agent that facilitates the formation of foam. A surfactant, when present in small amounts, reduces surface tension of a liquid (reduces the work needed to create the foam) or increases its colloidal stability by inhibiting coalescence of bubbles.[1] A blowing agent is a gas that forms the gaseous part of the foam.

Surfactants

Main article: Surfactant

Sodium laureth sulfate, or sodium lauryl ether sulfate (SLES), is a detergent and surfactant found in many personal care products (soaps, shampoos, toothpastes, etc.). It is an inexpensive and effective foamer. Sodium lauryl sulfate (also known as sodium dodecyl sulfate or SDS) and ammonium lauryl sulfate (ALS) are commonly used alternatives to SLES in consumer products.[2]

Co-surfactants

Surfactants which are less effective at foam production, may have additional co-surfactants added to increase foaming. In which case, the co-surfactant is referred to as the foaming agent. These are surfactants used in lower concentration in a detergent system than the primary surfactant, often the cocamide family of surfactants. Cocamide foaming agents include the nonionic cocamide DEA[3] and cocamidopropylamine oxide,[4] and the zwitterionic cocamidopropyl betaine and cocamidopropyl hydroxysultaine.[5]

Blowing agents

Main article: Blowing agent

There are two main types of blowing agents: gases at the temperature that the foam is formed, and gases generated by chemical reaction. Carbon dioxide, pentane, and chlorofluorocarbons are examples of the former. Blowing agents that produce gas via chemical reactions include baking powder, azodicarbonamide, titanium hydride, and isocyanates (when they react with water).

See also

References

  1. [1]
    1972, 31, 612IUPAC Compendium of Chemical Terminology 2nd Edition (1997)
  2. [2]
    Sodium Laureth Sulfate POE(2). Chemical Land 21, Seoul, Korea. Product Identification
  3. [3]
    "Cocamide DEA".
  4. [4]
    "Cocamidopropylamine Oxide (Explained + Products)".
  5. [5]
    "Cocamidopropyl Hydroxysultaine".
  • Grenni, P.; Caracciolo, A. Barra; Patrolecco, L.; Ademollo, N.; Rauseo, J.; Saccà, M.L.; Mingazzini, M.; Palumbo, M.T.; Galli, E.; Muzzini, V.G.; Polcaro, C.M.; Donati, E.; Lacchetti, I.; Di Giulio, A.; Gucci, P.M.B.; Beccaloni, E.; Mininni, G. (2018). "A bioassay battery for the ecotoxicity assessment of soils conditioned with two different commercial foaming products". Ecotoxicology and Environmental Safety. 148. Elsevier BV: 1067–1077. doi:10.1016/j.ecoenv.2017.11.071. ISSN 0147-6513. S2CID 51937556.
Share this article:

This article uses material from the Wikipedia article Foaming_agent, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.