SH-165_(OK)

Oklahoma State Highway 165

Oklahoma State Highway 165

State highway in Oklahoma, United States


State Highway 165 (SH-165) is a state highway in Muskogee County, Oklahoma. It runs east along Peak Boulevard in the southern part of Muskogee from US-64 to the northern terminus of the southern section of the Muskogee Turnpike, then runs north as a freeway connecting the two sections of the turnpike. The total length of the highway is 8.21 miles (13.21 km).[1]

Quick Facts State Highway 165, Route information ...

The freeway connecting the two halves of the Muskogee Turnpike was first numbered as SH-165 in 1969. The east–west portion of highway along Peak Boulevard was built and numbered as SH-165 by 1987.

Route description

SH-165 begins at an interchange on Peak Boulevard on the south side of Muskogee. To the west of this interchange, Peak Boulevard carries US-64; that highway exits from Peak at the interchange and proceeds south towards Warner. This interchange is also the eastern terminus of US-64 Business, which continues to the north towards downtown Muskogee.[1] From the interchange, SH-165 follows Peak Boulevard to the east as an expressway, crossing Coody Creek before turning to the east-northeast.[2] As the highway crosses York Street, it exits the Muskogee city limits.[1]

SH-165 then has an partial interchange with the Muskogee Turnpike; the turnpike is only accessible from southbound SH-165.[3] The Muskogee Turnpike consists of two disconnected sections of toll road with an untolled freeway segment in between; northbound SH-165 traffic merges with the northbound lanes of the turnpike to form this freeway. Shortly after this interchange, the highway re-enters Muskogee.[1] The SH-165 freeway serves the east side of Muskogee, with interchanges with city arterials such as Chandler Road, Hancock Street, and Gibson Street.[2] The highway also includes a full cloverleaf interchange with US-62.[3] SH-165 continues north of US-62 for 0.96 miles (1.54 km) to its final interchange with Hyde Park Road near the Port of Muskogee.[1] At this interchange, SH-165 ends; northbound traffic defaults onto the northbound Muskogee Turnpike towards Tulsa.

History

The freeway between the two sections of the Muskogee Turnpike that would later become SH-165 first appears on the official Oklahoma state map in 1969. The Muskogee inset of that map shows the freeway, unnumbered, and the southern SH-165–turnpike interchange in place, but with ramp stubs, as the SH-165 portion of Peak Boulevard had yet to be built.[4] The following year's map shows SH-165 in place along the connector freeway.[5] By 1975, the Peak Boulevard portion of SH-165 was under construction.[6] The highway was complete and in its present-day configuration by 1987.[7]

Junction list

The entire route is in Muskogee, Muskogee County.

More information mi, km ...

References

  1. Oklahoma Department of Transportation (n.d.). Control Section Maps: Muskogee County (PDF) (Map) (2010–2011 ed.). Scale not given. Oklahoma City: Oklahoma Department of Transportation. Retrieved August 10, 2012.
  2. Oklahoma Atlas and Gazetteer (Map). 1:200,000. DeLorme. 2006.
  3. Google (August 11, 2012). "Oklahoma State Highway 165" (Map). Google Maps. Google. Retrieved August 11, 2012.
  4. Oklahoma 1970 (PDF) (Map). Oklahoma Department of Highways. Muskogee inset. Retrieved August 13, 2012.
  5. Oklahoma 1970 (PDF) (Map). Oklahoma Department of Highways. Muskogee inset. Retrieved August 13, 2012.
  6. Official State Highway Map (PDF) (Map) (1975 ed.). Oklahoma Department of Highways. Muskogee inset. Retrieved August 14, 2012.
  7. Official State Map (PDF) (Map) (1987 ed.). Oklahoma Department of Transportation. Muskogee inset. Retrieved August 14, 2012.
KML is from Wikidata

Share this article:

This article uses material from the Wikipedia article SH-165_(OK), and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.