Reconstruction_from_zero_crossings

Reconstruction from zero crossings

Reconstruction from zero crossings

Add article description


The problem of reconstruction from zero crossings can be stated as: given the zero crossings of a continuous signal, is it possible to reconstruct the signal (to within a constant factor)? Worded differently, what are the conditions under which a signal can be reconstructed from its zero crossings?

This problem has two parts. Firstly, proving that there is a unique reconstruction of the signal from the zero crossings, and secondly, how to actually go about reconstructing the signal. Though there have been quite a few attempts, no conclusive solution has yet been found. Ben Logan from Bell Labs wrote an article in 1977 in the Bell System Technical Journal giving some criteria under which unique reconstruction is possible. Though this has been a major step towards the solution, many people[who?] are dissatisfied with the type of condition that results from his article.

According to Logan, a signal is uniquely reconstructible from its zero crossings if:

  1. The signal x(t) and its Hilbert transform xt have no zeros in common with each other.
  2. The frequency-domain representation of the signal is at most 1 octave long, in other words, it is bandpass-limited between some frequencies B and 2B.

Further reading

  • Logan, Jr, B.F. (April 1977). "Information in the Zero Crossings of Bandpass Signals" (PDF). Bell System Technical Journal. 56 (4): 487–510. doi:10.1002/j.1538-7305.1977.tb00522.x. S2CID 1636877.

Share this article:

This article uses material from the Wikipedia article Reconstruction_from_zero_crossings, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.