Radio_clock

Radio clock

Radio clock

Type of clock which self-synchronizes its time using dedicated radio transmitters

Not to be confused with clock radio, an alarm clock incorporating a broadcast radio receiver.

A radio clock or radio-controlled clock (RCC), and often colloquially (and incorrectly[1]) referred to as an "atomic clock", is a type of quartz clock or watch that is automatically synchronized to a time code transmitted by a radio transmitter connected to a time standard such as an atomic clock. Such a clock may be synchronized to the time sent by a single transmitter, such as many national or regional time transmitters, or may use the multiple transmitters used by satellite navigation systems such as Global Positioning System. Such systems may be used to automatically set clocks or for any purpose where accurate time is needed. Radio clocks may include any feature available for a clock, such as alarm function, display of ambient temperature and humidity, broadcast radio reception, etc.

A modern LF radio-controlled clock

One common style of radio-controlled clock uses time signals transmitted by dedicated terrestrial longwave radio transmitters, which emit a time code that can be demodulated and displayed by the radio controlled clock. The radio controlled clock will contain an accurate time base oscillator to maintain timekeeping if the radio signal is momentarily unavailable. Other radio controlled clocks use the time signals transmitted by dedicated transmitters in the shortwave bands. Systems using dedicated time signal stations can achieve accuracy of a few tens of milliseconds.

GPS satellite receivers also internally generate accurate time information from the satellite signals. Dedicated GPS timing receivers are accurate to better than 1 microsecond; however, general-purpose or consumer grade GPS may have an offset of up to one second between the internally calculated time, which is much more accurate than 1 second, and the time displayed on the screen.

Other broadcast services may include timekeeping information of varying accuracy within their signals.

Single transmitter

Radio clocks synchronized to a terrestrial time signal can usually achieve an accuracy within a hundredth of a second relative to the time standard,[1] generally limited by uncertainties and variability in radio propagation. Some timekeepers, particularly watches such as some Casio Wave Ceptors which are more likely than desk clocks to be used when travelling, can synchronise to any one of several different time signals transmitted in different regions.

Longwave and shortwave transmissions

Radio clocks depend on coded time signals from radio stations. The stations vary in broadcast frequency, in geographic location, and in how the signal is modulated to identify the current time. In general, each station has its own format for the time code.

List of radio time signal stations

More information Frequency, Callsign ...

Descriptions

  1. 3 umbrella antennas, fixed on 3 guyed tubular masts, insulated against ground with a height of 305 metres (1000') and 15 guyed lattice masts with a height of 270 metres (885')
  2. 3 umbrella antennas, fixed on 18 guyed lattice masts, height of central masts: 305 metres (1000')
  3. umbrella antenna, fixed on 13 guyed lattice masts, height of central mast: 425 metres (1395')
  4. 3 umbrella antennas, fixed on 3 guyed tubular masts, insulated against ground with a height of 205 metres (673') and 15 guyed lattice masts with a height of 170 metres (558')
  5. in air RJH66
  6. 3 umbrella antennas, fixed on 18 guyed lattice masts, height of central masts: 276 metres (905')
  7. umbrella antenna, fixed on 18 guyed lattice masts arranged in 3 rows, height of central masts: 238 metres (780')
  8. Before 1 April 2007, the signal was transmitted from Rugby, Warwickshire 52°21′33″N 01°11′21″W
  9. 3 T-antennas, spun 150 metres (492') above ground between two 227 metres (745') high guyed grounded masts in a distance of 655 metres (715 yards)
  10. Before 2008, transmitter located at 55°44′14″N 38°09′04″E
  11. umbrella antenna, fixed on a 275 metres (902') high central tower insulated against ground and five 257 metres (843') high lattice masts insulated against ground in a distance of 324 metres (355 yards) from the central tower
  12. T-antenna spun between two 125 metres (410') tall, grounded free-standing lattice towers in a distance of 227 metres (248 yards)
  13. T-antenna spun between two telecommunication towers in a distance of 33 metres (36 yards)
  14. Frequency for radio navigation system
  15. Frequency for radio teleswitch system
  16. Frequency for AM-broadcasting
  17. and requiring a more complex receiver for demodulating time signal
  18. since 1988, before 200 kHz
  19. Droitwich uses a T-aerial suspended between two 213 metres (699') guyed steel lattice radio masts, which stand 180 metres (197 yards) apart.
  20. Time signal article says 2.5 kW
  21. [15] says that the transmitter is located in Observatorio Naval Buenos Aires at Avenida España 2099, Buenos Aires; on Google Street View, some antenna structures can be seen both on and near the building, however, it's unclear where exactly the specific antenna is located. The coordinates here point to the building itself. 34°37′19″S 58°21′18″W
Radio clock is located in Earth
RJH69RJH6/|/|/|
RJH69RJH6
/|
/|
/|
JH77RJH77
JH77RJH77
RJH63
RJH63
← RJH90
← RJH90
RJH86
RJH86
RAB99
RAB99
JJY(Mt Otakadoya)
RTZRT
RTZRT
JJY(Mt Hagane)
MSF↓
MSF
↓
WWV, WWVB
↖︎RBU, RWM
↖︎RBU, RWM
BPC↗︎
BPC↗︎
↑ HBGHBG
↑ 
HBGHBG
||||DCF49, DCF77DCF49, DCF7
|
|
|
|
DCF49, DCF77DCF49, DCF7
BSF
BPL, BPM
||NS-ERNS-E
|
|
NS-ERNS-E
RNS-V
RNS-V
HGA22
HGA22
DCF39
DCF39
TDF↗︎
TDF↗︎
BBC Radio 4 ↗︎
WWVH
CHU
HLA
VTOYVTO
VTOYVTO
LOL
LOL
PEPPE
PEPPE
MIKESMIKE
MIKESMIKE

Many other countries can receive these signals (JJY can sometimes be received in New Zealand, Western Australia, Tasmania, Southeast Asia, parts of Western Europe and the Pacific Northwest of North America at night), but success depends on the time of day, atmospheric conditions, and interference from intervening buildings. Reception is generally better if the clock is placed near a window facing the transmitter. There is also a propagation delay of approximately 1 ms for every 300 km (200 miles) the receiver is from the transmitter.

Clock receivers

A number of manufacturers and retailers sell radio clocks that receive coded time signals from a radio station, which, in turn, derives the time from a true atomic clock.

One of the first radio clocks was offered by Heathkit in late 1983. Their model GC-1000 "Most Accurate Clock" received shortwave time signals from radio station WWV in Fort Collins, Colorado. It automatically switched between WWV's 5, 10, and 15 MHz frequencies to find the strongest signal as conditions changed through the day and year. It kept time during periods of poor reception with a quartz-crystal oscillator. This oscillator was disciplined, meaning that the microprocessor-based clock used the highly accurate time signal received from WWV to trim the crystal oscillator. The timekeeping between updates was thus considerably more accurate than the crystal alone could have achieved. Time down to the tenth of a second was shown on an LED display. The GC-1000 originally sold for US$250 in kit form and US$400 preassembled, and was considered impressive at the time. Heath Company was granted a patent for its design.[20][21]

In the 2000s (decade) radio-based "atomic clocks" became common in retail stores; as of 2010 prices start at around US$15 in many countries.[22] Clocks may have other features such as indoor thermometers and weather station functionality. These use signals transmitted by the appropriate transmitter for the country in which they are to be used. Depending upon signal strength they may require placement in a location with a relatively unobstructed path to the transmitter and need fair to good atmospheric conditions to successfully update the time. Inexpensive clocks keep track of the time between updates, or in their absence, with a non-disciplined quartz-crystal clock, with the accuracy typical of non-radio-controlled quartz timepieces. Some clocks include indicators to alert users to possible inaccuracy when synchronization has not been recently successful.

The United States National Institute of Standards and Technology (NIST) has published guidelines recommending that radio clock movements keep time between synchronizations to within ±0.5 seconds to keep time correct when rounded to the nearest second.[23] Some of these movements can keep time between synchronizations to within ±0.2 seconds by synchronizing more than once spread over a day.[24]

Other broadcasts

Main article: Time signal
Attached to other broadcast stations
Broadcast stations in many countries have carriers precisely synchronized to a standard phase and frequency, such as the BBC Radio 4 longwave service on 198 kHz, and some also transmit sub-audible or even inaudible time-code information, like the Radio France longwave transmitter on 162 kHz. Attached time signal systems generally use audible tones or phase modulation of the carrier wave.
Teletext (TTX)
Digital text pages embedded in television video also provide accurate time. Many modern TV sets and VCRs with TTX decoders can obtain accurate time from Teletext and set the internal clock. However, the TTX time can vary up to 5 minutes.[25]

Many digital radio and digital television schemes also include provisions for time-code transmission.

Digital Terrestrial Television
The DVB and ATSC standards have 2 packet types that send time and date information to the receiver. Digital television systems can equal GPS stratum 2 accuracy (with short term clock discipline) and stratum 1 (with long term clock discipline) provided the transmitter site (or network) supports that level of functionality.
VHF FM Radio Data System (RDS)
RDS can send a clock signal with sub-second precision but with an accuracy no greater than 100 ms and with no indication of clock stratum. Not all RDS networks or stations using RDS send accurate time signals. The time stamp format for this technology is Modified Julian Date (MJD) plus UTC hours, UTC minutes and a local time offset.
L-band and VHF Digital Audio Broadcasting
DAB systems provide a time signal that has a precision equal to or better than Digital Radio Mondiale (DRM) but like FM RDS do not indicate clock stratum. DAB systems can equal GPS stratum 2 accuracy (short term clock discipline) and stratum 1 (long term clock discipline) provided the transmitter site (or network) supports that level of functionality. The time stamp format for this technology is BCD.
Digital Radio Mondiale (DRM)
DRM is able to send a clock signal, but one not as precise as navigation satellite clock signals. DRM timestamps received via shortwave (or multiple hop mediumwave) can be up to 200 ms off due to path delay. The time stamp format for this technology is BCD.

Multiple transmitters

A radio clock receiver may combine multiple time sources to improve its accuracy. This is what is done in satellite navigation systems such as the Global Positioning System. GPS, Galileo and GLONASS satellite navigation systems have one or more caesium, rubidium or hydrogen maser atomic clocks on each satellite, referenced to a clock or clocks on the ground. Dedicated timing receivers can serve as local time standards, with a precision better than 50 ns.[26][27][28][29] The recent revival and enhancement of LORAN, a land-based radio navigation system, will provide another multiple source time distribution system.

GPS clocks

Main article: GPS disciplined oscillator

Many modern radio clocks use satellite navigation systems such as Global Positioning System to provide more accurate time than can be obtained from terrestrial radio stations. These GPS clocks combine time estimates from multiple satellite atomic clocks with error estimates maintained by a network of ground stations. Due to effects inherent in radio propagation and ionospheric spread and delay, GPS timing requires averaging of these phenomena over several periods. No GPS receiver directly computes time or frequency, rather they use GPS to discipline an oscillator that may range from a quartz crystal in a low-end navigation receiver, through oven-controlled crystal oscillators (OCXO) in specialized units, to atomic oscillators (rubidium) in some receivers used for synchronization in telecommunications. For this reason, these devices are technically referred to as GPS-disciplined oscillators.

GPS units intended primarily for time measurement as opposed to navigation can be set to assume the antenna position is fixed. In this mode, the device will average its position fixes. After approximately a day of operation, it will know its position to within a few meters. Once it has averaged its position, it can determine accurate time even if it can pick up signals from only one or two satellites.

GPS clocks provide the precise time needed for synchrophasor measurement of voltage and current on the commercial power grid to determine the health of the system.[30]

Astronomy timekeeping

Although any satellite navigation receiver that is performing its primary navigational function must have an internal time reference accurate to a small fraction of a second, the displayed time is often not as precise as the internal clock. Most inexpensive navigation receivers have one CPU that is multitasking. The highest-priority task for the CPU is maintaining satellite lock—not updating the display. Multicore CPUs for navigation systems can only be found on high end products.

For serious precision timekeeping, a more specialized GPS device is needed. Some amateur astronomers, most notably those who time grazing lunar occultation events when the moon blocks the light from stars and planets, require the highest precision available for persons working outside large research institutions. The Web site of the International Occultation Timing Association[31] has detailed technical information about precision timekeeping for the amateur astronomer.

Daylight saving time

Various formats listed above include a flag indicating the status of daylight saving time (DST) in the home country of the transmitter. This signal is typically used by clocks to adjust the displayed time to meet user expectations.

See also

References

  1. [1]
    Lombardi, Michael A. (March 2010). "How Accurate is a Radio Controlled Clock?" (PDF). Horological Journal. 152 (3): 108–111. Archived (PDF) from the original on 2021-01-07. Retrieved 2023-12-01 – via National Institute of Standards and Technology website.
  2. [2]
    Standard Time and Frequency Signals (PDF) (in Russian), retrieved 2018-07-15 — official signal specification.
  3. [3]
    Dennis D. McCarthy, P. Kenneth Seidelmann Time: From Earth Rotation to Atomic Physics Wiley-VCH, 2009 ISBN 3-527-40780-4 page 257
  4. [4]
    "NIST Radio Station WWVB". NIST. March 2010. Archived from the original on 25 March 2014. Retrieved 18 March 2014.
  5. [5]
    "BPC". National Time Service Center, Chinese Academy of Sciences. Archived from the original on February 14, 2018. Retrieved 16 March 2013.
  6. [6]
    Yvonne Zimber (2007-05-09). "DCF77 transmitting facilities". Archived from the original on 2010-05-14. Retrieved 2010-05-02.
  7. [7]
    "Synchronizing time with DCF77 and MSF60". Archived from the original on 2011-01-12. Retrieved 2011-09-12. 090917 compuphase.com
  8. [8]
    "A Time Station Signal Project for Taiwan". Archived from the original on 2017-04-20. Retrieved 2018-07-09.
  9. [9]
    "长波授时 (Longwave time signal)". National Time Service Center, Chinese Academy of Sciences. Archived from the original on 10 January 2013. Retrieved 16 March 2013.
  10. [10]
    "科研成果 (Research achievements)". National Time Service Center, Chinese Academy of Sciences. Archived from the original on 17 April 2013. Retrieved 16 March 2013.
  11. [11]
    "PTB time monitor". Archived from the original on 2018-07-16. Retrieved 2018-07-16. — in German
  12. [12]
    "Radio stations in London, England". Archived from the original on 2016-04-19. Retrieved 2016-04-26. Birmingham, Droitwich, 500 kW + Blackwall Tunnel + Rotherhithe Tunnel
  13. [13]
    "L.F. RADIO-DATA: Specification of BBC phase-modulated transmissions on long-wave" (PDF) (published 2006-10-24). December 1984. Archived (PDF) from the original on 2016-03-04. Retrieved 2016-04-25. The BBC long-wave a.m. transmitter network carries a low bit-rate data signal, in addition to the normal programme signal modulation. The data signal is conveyed by phase-modulation of the carrier
  14. [14]
    "短波授时 (Shortwave time signal)". National Time Service Center, Chinese Academy of Sciences. Archived from the original on 2013-01-15. Retrieved 2013-03-16.
  15. [15]
    Information on the Official Time and Standard Frequency Archived 2018-08-28 at the Wayback Machine — in Spanish
  16. [16]
    "Rádio-Difusão de Sinais Horários". Observatório Nacional. Archived from the original on 2014-03-12. Retrieved 2012-02-23.
  17. [17]
    "QSL: MIKES Time Station, Espoo, Finland". SWL DX Blog. 14 May 2014. Archived from the original on 2016-10-12. Retrieved 2016-10-11. Reproduces a QSL letter from MIKES with technical details.
  18. [18]
    BIPM Annual Report on Time Activities – Time Signals Archived 2021-10-10 at the Wayback Machine, retrieved 2018 July 31.
  19. [19]
    "SI units in Finland, time and frequency |".
  20. [20]
    "Heathkit GC-1000-H Most Accurate Clock". Pestingers. Archived from the original on February 14, 2020.
  21. [21]
    US patent 4582434, David Plangger and Wayne K. Wilson, Heath Company, "Time corrected, continuously updated clock", issued April 15, 1986
  22. [22]
    " Radio controlled clock £19.95 Archived 2013-02-16 at archive.today
  23. [23]
    "How Accurate is a Radio Controlled Clock?" by Michael Lombardi (2010).
  24. [24]
    RADIO-CONTROLLED WALLCLOCK INSTRUCTION MANUAL
  25. [25]
    "How's your GHD8015F2 operating? — Personal Video Recorders — Digital Spy Forums". Digital Spy. 100506 digitalspy.co.uk
  26. [26]
    "datasheet i-Lotus TX Oncore" (PDF). Archived (PDF) from the original on 2015-10-16. Retrieved 2014-01-22.
  27. [27]
    "Symmetricom XL-GPS". Archived from the original on 2014-02-01. Retrieved 2014-01-22.
  28. [28]
    "datasheet Trimble Resolution SMT GG" (PDF). Archived (PDF) from the original on 2013-06-22. Retrieved 2014-01-22.
  29. [29]
    "datasheet u-blox NEO/LEA-M8T" (PDF). Archived (PDF) from the original on 2017-04-12. Retrieved 2017-04-11.
  30. [30]
    KEMA, Inc. (November 2006). "Substation Communications: Enabler of Automation / An Assessment of Communications Technologies". UTC — United Telecom Council: 3. {{cite journal}}: Cite journal requires |journal= (help)
  31. [31]
    "International Occultation Timing Association". Archived from the original on 2006-07-20. Retrieved 2006-07-19.
Look up radio clock in Wiktionary, the free dictionary.
Wikimedia Commons has media related to Radio clocks.
Share this article:

This article uses material from the Wikipedia article Radio_clock, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.