The J Class of racing yachts (sometimes called "J-boats") were built to the specifications of Nathanael Herreshoff's Universal Rule. The J Class is considered the apex of the era when the Universal Rule determined eligibility in the America's Cup.

The J Class is one of several classes deriving from the Universal Rule for racing boats. The rule was established in 1903 and rates double-masted racers (classes A through H) and single-masted racers (classes I through S). From 1914 to 1937, the rule was used to determine eligibility for the Americas Cup. In the late 1920s, the trend was towards smaller boats and so agreement among American yacht clubs led to rule changes such that after 1937 the International Rule would be used for 12 Metre class boats.^[1]

J Class examples

A table of well-known J Class yachts demonstrating that application of the Universal Rule could result in a rating ${\displaystyle R}$ from 65 to 76 feet (20 to 23 m). Length overall (LOA) of the yachts ranged from 119 to 139 feet (36 to 42 m). Sail areas of the yachts ranged from 7,288 to 7,651 square feet (677.1 to 710.8 m²).

Colors: Red: America's Cup challengers; Blue: defenders; Green: non-competitors

More information Launch, Name ...

Launch	Name	Builder	LOA	LWL	Beam	Draught	Displacement	Sail area
1930	Shamrock V	Camper and Nicholsons	119 ft 1 in	81 ft 1 in	20 ft	14 ft 9 in	134 tons	7,540 sq ft
1930	Weetamoe	Herreshoff Manufacturing Company	125 ft 9 in	83 ft	20 ft	14 ft 6 in		7,550 sq ft
1930	Yankee	George Lawley & Son	126 ft	83 ft	22 ft 6 in	14 ft 6 in	148 tons	7,288 sq ft
1930	Whirlwind	George Lawley & Son	139 ft	86 ft	21 ft 9 in	15 ft 6 in	158 tons	7,335 sq ft
1930	Enterprise	Herreshoff Manufacturing Company	120 ft 9 in	80 ft	23 ft	14 ft 6 in	128 tons	7,583 sq ft
1933	Velsheda	Camper and Nicholsons	127 ft 6 in	83 ft	21 ft 6 in	15 ft
1934	Endeavour	Camper and Nicholsons	129 ft 6 in	83 ft 6 in	22 ft	14 ft 9 in	143 tons	7,651 sq ft
1934	Rainbow	Herreshoff Manufacturing Company	127 ft 6 in	82 ft	21 ft	15 ft	141 tons	7,535 sq ft
1936	Endeavour II	Camper and Nicholsons	135 ft 6 in	87 ft	21 ft 6 in	15 ft	162 tons	7,543 sq ft
1937	Ranger	Bath Iron Works	135 ft	87 ft	21 ft	15 ft	166 tons	7,546 sq ft

Close

Prior to the adoption of the Universal Rule, the Seawanhaka Rule was used to govern the design of boats for inter club racing. As the Seawanhaka Rule used only two variables: Load Waterline Length (${\displaystyle L.W.L}$) and Sail Area, racing boats at the time were becoming more and more extreme. Larger and larger sails atop shorter and wider boats leading either to unwieldy, and ultimately unsafe, boats or craft that simply were not competitive.^[3] In order to account, in some ways, for the beam and the relationship of the length overall (${\displaystyle L.O.A}$) to the load waterline length the universal rule was proposed, taking into account displacement and length, which itself was a result of a formula taking into account such things as "quarter beam length". As different boats were designed and built, the notion of classes was derived to maintain groupings of competitive class.

Following Sir Thomas Lipton's near success in the 1920 America's Cup, he challenged again for the last time at age 79, in 1929. The challenge drew all the novelties developed in the previous decade on small boats to be ported onto large boats, and pitted British and American yacht design in a technological race. Between 1930 and 1937, the improvements brought to the design of sailboats were numerous and significant:

• The high-aspect bermuda rig replaces the gaff rig on large sailboats
• Solid-rod lenticular rigging for shrouds and stays
• Luff and foot grooved spars with rail and slides replacing wooden hoops
• Multiplication of spreader sets: one set previously (1914), two sets (1930), three sets (1934), four sets (1937)
• Multiplication of the number of winches: 23 winches, Enterprise (1930)
• Electrical navigational instruments borrowed from aeronautics with repeaters for windvane and anemometer, Whirlwind (1930)^[4]
• "Park Avenue" boom (Enterprise, 1930) and "North Circular" boom (Rainbow, 1934) developed to trim mainsail foot^[5]
• Riveted aluminium mast (4,000 lb (1,800 kg), Duralumin), Enterprise (1930)
• Genoa Jib (Rainbow, 1934) and quadrangular jib (Endeavour, 1934)^[6]
• Development of nylon parachute (symmetric) spinnakers, including the World's largest at 18,000 sq ft (1,700 m²) on Endeavour II (1936)
• Duralumin wing-mast, Ranger (1937)

All these improvements may not have been possible without the context of the America's Cup and the stability offered by the Universal Rule. The competition was a bit unfair because the British challengers had to be constructed in the country of the Challenging Yacht Club (a criterion still in use today), and had to sail on their own hull to the venue of the America's Cup (a criterion no longer in use today): the design for such an undertaking required the challenging boat to be more seaworthy than the American boats, whose design was purely for speed in closed waters regattas. The yachts that remain in existence are all British, and probably log more nautical miles today than they ever did. This would not have been possible if Charles Ernest Nicholson did not obtain unlimited budgets to achieve the quality of build for these yachts.

Yacht designer Clinton Hoadley Crane noted in his memoirs that "America's Cup racing has never led to good sportsmanship. The attitude of the New York Yacht Club [...] has been more that of a man in the forward position at war who has been ordered to hold his position at all costs – at all costs."^[7] In 1930, Thomas Lipton spent $1,000,000 for his Shamrock V challenge when America was facing a stock market crash, but the NYYC still built four cup defenders. The rivalry led both countries to put on a display of true technological innovations using the maximum load waterline length authorized by the rule for Endeavour II and Ranger in 1937.

Most J Class yachts were scrapped prior to or during World War II because steel and lead had become precious to the war effort. In the post-war era, J Class racing was deemed far too expensive, so no challenge for the America's Cup was placed until 1958 with the smaller third International Rule 12 Metre class.

Ten yachts were built to the J Class rule between 1930 and 1937, six in America and four in Great Britain.

Other boats raced in J Class regattas: the yachts Katoura (Starling Burgess, 1927), Resolute (Nathanael Herreshoff, 1914) and Vanitie (William Gardner, 1914) served as trial horses and most International Rule 23mR yachts were converted to the J Class, of which three remain in existence: Astra, Cambria and Candida.

More information Launch, Name ...

J Class conversions    did not compete or qualify    Challengers    Defenders    replicas
Launch	Name	Sail			Designer	First ship-owner and Yacht Club	Description
1893	Britannia	1	K1		George Lennox Watson	Prince Albert Edward, RYS	YRA first class rater converted to the J Class (1931). scuttled (1936)
1907	White Heather II	B1	7	K7	William Fife III	Myles Burton Kennedy, Royal Albert YC	23mR converted to the J Class (1930). scrapped to cast the lead for Velsheda (1932)
1914	Resolute	J1			Nathanael Greene Herreshoff	Henry Walters syndicate, NYYC	Universal rule 75-footer defender (AC1920). converted to the J Class (1931). scrapped (1939)
1914	Vanitie	I1			William Gardner	Alexander Smith Cochran, NYYC	Universal rule 75-footer defender trials (AC1920). converted to the I Class (1931). scrapped (1939)
1928	Astra	K2	JK2		Charles Ernest Nicholson	Sir Adam Mortimer Singer, RYS	23mR converted to the J Class (1931). refitted (1987)
1928	Cambria	K4			William Fife III	Sir William Berry, RYS	23mR refitted (1995, 2001).re-rated as a J Class (2003)
1929	Candida	K8			Charles Ernest Nicholson	Hermann Anton Andreae, RSYC	23mR converted to the J Class (1931). refitted (1989)
1930	Shamrock V	JK3			Charles Ernest Nicholson	Sir Thomas Lipton, RUYC	Unsuccessful challenger (AC1930).[14] restored by Pendennis shipyard (2001).
1930	Weetamoe	1			Clinton Hoadley Crane	George Nichols syndicate, NYYC	defender trials (AC1930, AC1934). scrapped (1938)
1930	Yankee	2	JUS2		Frank Cabot Paine	John Silsbee Lawrence syndicate, NYYC	defender trials (AC1930, AC1934, AC1937). scrapped (1941)
1930	Whirlwind	3			Lewis Francis Herreshoff	Landon Ketchum Thorne syndicate, NYYC	defender trials (AC1930). scrapped (1935)
1930	Enterprise	4			Starling Burgess	Harold Vanderbilt syndicate, NYYC	successful defender 4:0 (AC1930). scrapped (1935)
1933	Velsheda	JK7			Charles Ernest Nicholson	William Lawrence Stephenson, RYS	restored by Southampton Yacht Services (1997)
1934	Endeavour	JK4			Charles Ernest Nicholson	Sir Thomas Sopwith, RYS	unsuccessful challenger 2:4 (AC1934). restored by Royal Huisman (1989)
1934	Rainbow	J5	J4		Starling Burgess	Harold Vanderbilt syndicate, NYYC	successful defender 4:2 (AC1934). defender trials (AC1937). scrapped (1940)
1936	Endeavour II	JK6			Charles Ernest Nicholson	Sir Thomas Sopwith, RYS	unsuccessful challenger 0:4 (AC1937). scrapped (1968)
1937	"77C"-Ranger	J5			Starling Burgess & Olin Stephens	Harold Vanderbilt, NYYC	successful defender 4:0 (AC1937). scrapped (1941)
2004	"77C"-Ranger	J5			Starling Burgess & Olin Stephens	John A. Williams, NYYC	replica of "77C"-Ranger (1937) built by Royal Denship
2009	Hanuman	JK6			Charles Ernest Nicholson	James H. Clark, NYYC	replica of Endeavour II (1936) built by Royal Huisman
2010	"77F"-Lionheart	JH1			Starling Burgess & Olin Stephens	Harold Goddijn	original design (model "77F", 1937) built by Claasen Jachtbouw
2012	Rainbow	JH2			Starling Burgess	Chris Gongriep, ZZV	replica of Rainbow (1934) built by Holland Jachtbouw
2015	Topaz	J8			Frank Cabot Paine		original design (proposal "A", 1935) built by Holland Jachtbouw
2017	Svea	JS1			Tore Holm	Thomas Siebel, StFYC	original design (1937) built by Vitters Shipyard

Close