Ground_wave_propagation

Ground conductivity

Ground conductivity

Add article description


Ground conductivity refers to the electrical conductivity of the subsurface of the earth. In the International System of Units (SI) it is measured in millisiemens per meter (mS/m).

Ground conductivity map of the US

Radio propagation

Ground conductivity is an extremely important factor in determining the field strength and propagation of surface wave (ground wave) radio transmissions. Low frequency (30โ€“300 kHz) and medium frequency (300โ€“3000 kHz) radio transmissions are particularly reliant on good ground conductivity as their primary propagation is by surface wave.[1] It also affects the real world radiation pattern of high frequency (3-30 MHz) antennas, as the so-called "takeoff angle" is not an inherent property of the antenna but a result of a ground reflection.[2] For this reason ITU publishes an extensive world atlas of ground conductivities.[3]

Other uses

Ground conductivity is sometimes used in determining the efficiency of a septic tank, using electromagnetic induction, so that contaminants do not reach the surface or nearby water supplies.[4]


References

  1. "Recommendation ITU-R P.368-7 Ground-wave propagation curves for frequencies between 10 kHz and 30 MHz" (DOC). International Telecommunication Union (ITU). 1992. Retrieved 2015-10-28.
  2. Kazimierz Siwiak KE4PT (April 2016). "Ground influence on antenna patterns". QST. American Radio Relay League: 41โ€“42.{{cite journal}}: CS1 maint: numeric names: authors list (link)
  3. Taylor, Rick; Lee, Doolittle (June 2003). "Ground conductivity survey of a septic system during and after failure". Retrieved 2008-02-10.[permanent dead link]



Share this article:

This article uses material from the Wikipedia article Ground_wave_propagation, and is written by contributors. Text is available under a CC BY-SA 4.0 International License; additional terms may apply. Images, videos and audio are available under their respective licenses.