SS Conte di Savoia ("Count of Savoy") was an Italian ocean liner built in 1932 at the Cantieri Riuniti dell'Adriatico, Trieste.^[1]

Quick Facts History, Kingdom of Italy ...

History
Kingdom of Italy
Name	SS Conte di Savoia
Owner	Italian Line
Port of registry	Kingdom of Italy
Builder	Cantieri Riuniti dell'Adriatico of Trieste, Italy
Launched	28 October 1931
Christened	Marie José of Belgium
Maiden voyage	30 November 1932
Fate	Scrapped in 1950
General characteristics
Type	Ocean liner
Tonnage	48,502 gross register tons
Length	248.25 m (814.5 feet)
Beam	29.28 m (96 feet)
Height	35 m (114.8 feet)
Draught	9.5 m (31.2 feet)
Installed power	Steam turbines
Propulsion	Quadruple propellers
Speed	27 knots (50 km/h; 31 mph)
Capacity	2,200 total: 500 first class 366 second class 412 tourist class 922 third class
Crew	786 total

Close

Conte di Savoia was originally ordered for the Lloyd Sabaudo line; however, after a merger with the Navigazione Generale Italiana, the ship was completed for the newly formed Italia Flotte Riunite.^[1] The new Italia Line also controlled Rex, a similar though slightly larger ship completed just two months before Conte di Savoia. The Conte di Savoia was more modern in decoration and appearance than Rex and was the first major liner fitted with gyroscopic stabilisers.

In November 1932, she made her maiden voyage to New York.^[1] Unlike Rex, she never made a record transatlantic crossing, reaching a best speed of 27.5 knots (31.6 mph) in 1933.^[1]

Conte di Savoia had one unusual feature designed to increase passenger numbers. Three huge anti-rolling gyroscopes were fitted low down in a forward hold. These rotated at high revolutions and were designed to mitigate rolling - a persistent problem on the rough North Atlantic crossing that affected all shipping lines.^[2] In practice they reduced the rolling by slowing down the rolling period, but they also caused the vessel to "hang" annoyingly when the vessel was on the extreme limit of her rolls. For safety reasons the system was quickly abandoned on eastbound crossings where the prevailing weather produced following seas, although it was still used on westbound crossings. This was because with a following sea (and the deep slow rolls this generated) the vessel tended to 'hang' with the system turned on, and the inertia it generated made it harder for the vessel to right herself from heavy rolls.^[2] None of this affected the operation of the shipping line's advertising department and the benefits of a "smooth crossing" were heavily promoted during the life of the ship.

In 1931, Italian architect, Melchiorre Bega was selected to design the interior lay-out and furnishings of the Conte di Savoia.^[3] Bega, who was well-known for his innovative designs of stores, cafés and hotels,^[4] created a modernist interior.

Conte di Savoia was requisitioned for war service in 1940,^[5] and was sunk in 1943. The hulk was refloated in 1945 and later scrapped in 1950.^[5][6]

• Eugenio Pacelli's 1936 visit to the United States