This is a list of past and present rolling stock used on the Talyllyn Railway (Welsh: Rheilffordd Talyllyn), a 2 ft 3 in (686 mm) narrow gauge preserved railway line running for 7.25 miles (11.67 km)^[1] from Tywyn on the Mid-Wales coast to Nant Gwernol near the village of Abergynolwyn. The line was opened in 1866 to carry slate from the quarries at Bryn Eglwys to Tywyn, and was the first narrow gauge railway in Britain authorised by Act of Parliament to carry passengers using steam haulage.^[2][3] Despite severe under-investment,^[4] the line remained open, and in 1951 it became the first railway in the world to be preserved as a heritage railway by volunteers.^[5][6]

When first opened, the railway owned two steam locomotives, Talyllyn and Dolgoch, and five carriages, including one brake van. There were no additions to the rolling stock until the line was taken over in 1951.^{[note 1]} Two ex-Corris Railway locomotives were then purchased from British Railways, and subsequent additions have brought the total up to six steam locomotives, four diesels and twenty-three carriages. As of 2023^[update], Boston Lodge Works is constructing three bogie carriages, one composite with disabled access and two third class, numbered No. 24 to 26. The first of these, No. 24, was delivered to the railway in August 2023.

The railway has six steam locomotives for passenger trains and four diesel locomotives that usually haul only works trains.^{[note 2]} It is unusual for all steam locomotives to be operable at one time, as there is usually at least one locomotive undergoing an overhaul.^[9] In the early days of preservation Rev. W Awdry, the author of the Railway Series books, visited the railway on a family holiday and became involved as a volunteer soon afterwards.^[10] He, and later his son Christopher, wrote the Talyllyn Railway into the books as the Skarloey Railway, and most locomotives on the Talyllyn have a fictional counterpart in that series.^[11] These are listed in the right hand column.

Steam locomotives

For technical details about each locomotive, see the relevant locomotive article.

More information Number, Name ...

Number	Name	Image	Wheel Arrangement	Builder	Works number	Date built	Current status (as of 2024[update])	Railway Series equivalent[12]
1	Talyllyn		0-4-2ST[13]	Fletcher, Jennings & Co., Whitehaven[13]	42[13]	1864[13]	In service.[13]	Skarloey[14]
			One of two original locomotives, it was built as an 0-4-0ST without a cab. By 1867, trailing wheels had been added to improve stability, and it had a cab installed at the same time.[13]
2	Dolgoch		0-4-0WT[15]	Fletcher, Jennings & Co., Whitehaven[15]	63[15]	1866[15]	In service[15]	Rheneas[16]
			The second original locomotive. Like Talyllyn, it was built without a cab, though one was subsequently added. It was named after the intermediate station and local waterfalls, though after the Boer War, it carried the name Pretoria for several years. In 2011 it received a new boiler, and returned to steam in time for the 60th anniversary celebrations of the preservation society on 14 May.
3	Sir Haydn		0-4-2ST[17]	Hughes, Falcon Works, Loughborough[17]	323[17]	1878[17]	In service[17]	Sir Handel[18]
			An ex-Corris Railway locomotive, purchased in 1951 and subsequently named after Sir Henry Haydn Jones, owner of the railway prior to preservation. Following the expiry of its 10-year boiler ticket in early 2012, the loco was stored out of use at the Corris Railway until April 2013, when it commenced a tour of various railway sites in England to help raise funds for its overhaul. In February 2015 it was moved back to the Talyllyn. In Autumn 2015 it was sent to the Vale of Rheidol Railway's new workshop in Aberystwyth for its overhaul to start. It returned to service in 2018, in time for its 140th birthday.[17]
4	Edward Thomas		0-4-2ST[19]	Kerr Stuart, Stoke-on-Trent[19]	4047[19]	1921[19]	Out of service[19]	Peter Sam[20]
			The second ex-Corris Railway locomotive, also purchased in 1951 and subsequently named after the general manager of the line prior to preservation. It was fitted with a Giesl ejector between 1958 and 1969.[21] Received a new boiler in 2004. Withdrawn from service for overhaul in April 2023.
6	Douglas		0-4-0WT[22]	Andrew Barclay, Kilmarnock[22]	1431[22]	1918[22]	Awaiting overhaul[22]	Duncan
			A "Modified E Class", built for the depot railway serving RAF Calshot.[23] It was donated to the Talyllyn in 1953, re-gauged from 2 ft (610 mm) gauge and named after Douglas Abelson, who donated the locomotive.[24] Returned to service July 2013 as 'Douglas' in bright red and black border livery. Repainted to RAF blue livery in March 2018.[22]
7	Tom Rolt		0-4-2T[25]	Talyllyn Railway, Pendre[25]	none given[25]	1991[25][note 3]	In service[25]	Ivo Hugh
			This locomotive was built by the Talyllyn Railway using components from a Bord na Móna (Irish Peat Board) Andrew Barclay locomotive. It was originally intended to give it the jocular name Irish Pete. However, prior to completion, it was decided to name it in honour of L.T.C. Rolt, one of the founders of the Talyllyn Railway Preservation Society. Returned to service in 2020 following a ten-yearly overhaul.[25]

Close

Diesel locomotives

More information Number, Name ...

Number	Name	Image	Type	Builder	Date built	Power (hp)[26]	Wheel diameter[26]	Railway Series equivalent[12]
5	Midlander		4wDM	Ruston & Hornsby	1941[27]	48	1 ft 6 in (0.46 m)	Rusty
			This locomotive was purchased in 1957 from Jee's quarries at Hartshill,[28] and contains parts that were cannibalised off an identical locomotive. It was named after the Midlands area group of the preservation society that donated the locomotive.
9	Alf		0-4-0DM	Hunslet Engine Co.	1950	75	2 ft (0.61 m)	Fred
			This is an ex-National Coal Board locomotive, from Huncoat Colliery in Lancashire.[29] It was named after Alf Robens, chairman of the National Coal Board.[30]
11	Trecwn		4wDH	Baguley	1983–84[31]	99	2 ft (0.61 m)
			One of three Baguley diesels that were purchased from RNAD Trecwn in South Wales in 2008. The third diesel is used for spares. These were originally bought by a consortium of volunteers, but have since been purchased from this group by the railway. They were re-gauged from 2 ft 6 in (762 mm) to the Talyllyn's 2 ft 3 in (686 mm) gauge. This loco was originally numbered T 0006 00 NZ 32 (BD 3764)[31][32] and entered service on the Talyllyn in 2014.
12	St. Cadfan		4wDH	Baguley	1983–84[31]	99	2 ft (0.61 m)
			The second of the three Baguley diesels that were purchased from RNAD Trecwn in South Wales in 2008.[note 4] This loco was originally numbered BD 3779[31][32] and named after St Cadfan's Church in Tywyn.

Close

Self-propelled engineering vehicles

More information Name, Image ...

Name	Image	Type	Builder	Date built
Toby		Permanent Way Trolley	John Bate[33]	1954[33]
		Small trolley used by engineers for transportation to worksites. Built from a second hand Austin 7 engine and gearbox, mounted on a custom-made chassis.[34] It was damaged in a shunting accident in 2008 and taken out of service, but returned to use in 2019.[33]
–		Flail Mower	Talyllyn Railway	1998
		Rail mounted self-propelled vehicle used to clear lineside vegetation.[35] Designed by John Bate (Chief Engineer 1963–1994) and built from chassis components from two Ruston & Hornsby locomotives, the framing and motor components of a Smalley excavator, the flail mechanism and cab from a McConnel flail mower and a new Perkins diesel power unit.[36]
Idris		4w Track Tamper	Matisa[37]	2021
		Rail mounted track tamper bought by the railway in 2021, but suffered issues with the loading gauge that needed to be rectified before re-entering service. A seat and toolbox were also added during the overhaul.[8]

Close

Former locomotives and engineering vehicles

More information Number, Name ...

Number	Name[note 5]	Image	Type	Builder	Date built	Power (hp)	Year with- drawn
5	"The Lawnmower"[38]		4wPH	David Curwen	1952	20[39]	1953
			This lightweight locomotive was built by member David Curwen using a Ford Model T engine and transmission from L.T.C Rolt's narrowboat and the wheels from a Talyllyn Railway slate wagon. It worked the Fridays-only winter passenger service until 1953,[40][41] when it was taken out of use with a failed gearbox. It was dismantled in 1954,[38] and converted to flat wagon No. 19 (see below).[42] It is proposed to rebuild it as a memorial to David Curwen, using a replacement engine and bodywork.[40]
7	"Charlie's Ant"[32][note 6]		4-2-0	Talyllyn Railway	1954		c.1958
			A Mercury tractor that had been adapted to push standard gauge rolling stock by the addition of a buffer beam. It was further adapted in 1954 for use on the Talyllyn, and later converted to run on paraffin instead of petrol.[43] It was little used after 1958 and later scrapped. It was nicknamed after Charles Uren, the railway's chief engineer.[29]
8	Merseysider		4wDH	Ruston & Hornsby	1964	50	2016
			This was originally built using parts from three 3 ft (914 mm) gauge locomotives from Park Gate steelworks in Rotherham, acquired in 1969.[29] The superstructure was replaced c. 2000. It has a Dowty hydrostatic transmission. The name was chosen by the donor of the locomotive.[44] This locomotive was sold in 2016 to an enthusiast.[45]
10	Bryn Eglwys		4wDH	Motor Rail	1985	110	2014
			This was originally a 2 ft 6 in (762 mm) gauge National Coal Board locomotive from Hem Heath colliery near Stoke-on-Trent.[46] It arrived on the Talyllyn September 1997,[32] and was re-painted into standard Talyllyn livery during summer 2005. The locomotive was named after the Bryn Eglwys slate quarries. The loco was sold to the North Gloucestershire Railway,[47] and left the railway in August 2014 when the first Baguley loco entered service.
–	–		4w Track Tamper	Matisa[37]	1990		2021
			Rail mounted track tamper. Built from parts of two ex-MOD standard gauge tampers that were acquired in 1989. It was designed and assembled by John Bate, and commissioned on 26 June 1990.[48] In 2021 it was sold when a new tamper was purchased.[8]

Close

Visiting locomotives

As of 2023^[update] there have only been three visiting locomotives capable of running on the Talyllyn Railway's unusual gauge. These are Motor Rail Simplex diesel No. 5 Alan Meaden, Winson Engineering and Drayton Designs No. 7 Tattoo class design^[49] similar to the Talyllyn's No. 4, and battery-electric Clayton shunter No. 9 Aberllefenni.^[50] All these locomotives are from the Corris Railway.

In July 2015 a gala was held to mark the railway's 150th anniversary, and two 1 ft 11+1⁄2 in (597 mm) gauge locomotives visited the railway: George England and Co. locomotive Prince from the Ffestiniog Railway and Hunslet Engine Company Russell from the Welsh Highland Heritage Railway, both in Porthmadog. Two lengths of temporary track were laid at Tywyn Wharf to allow the locomotives to operate over a short distance.

In July 2016, another gala was held, with three visiting locos, all built by Fletcher, Jennings and Co. Together with Talyllyn and Dolgoch, this was an assembly of all five surviving locos in the UK built by this firm.^[51] As with the previous gala, temporary track was laid due to the differing gauges.^[52] One of the locomotives, Captain Baxter, ran on a short section of standard gauge track. The other two Fletcher Jennings locomotives, William Finlay and Townsend Hook, were static exhibits only and are therefore not listed below. William Finlay remained at Tywyn after the event and is now on display at the Narrow Gauge Railway Museum.

In September 2021, to mark the centenary of No. 4, Corris Railway No. 7 made another visit to the Talyllyn, along with the other preserved Kerr Stuart Tattoo class, Stanhope, and Sirdar class Diana. Stanhope and Diana ran on temporary 2 ft (610 mm) track laid at Wharf station, and No. 7 pulled several trains along the full length of the line.^[53]

More information Number, Name ...

Number	Name	Image	Type	Builder	Date built
5	Alan Meaden		4wDM	Motor Rail Simplex	1965
			A former 2 ft (610 mm) gauge diesel from Staveley Lime Products, Hindlow, Derbyshire, named in honour of the Corris Society's founder. It visited the Talyllyn in 1983 and 1990.[54]
7	(unnamed)		0-4-2ST	Winson Engineering and Drayton Designs	2005
			Built for the Corris Railway, based on the Kerr Stuart "Tattoo" class design of Corris No. 4. It visited the Talyllyn in 2011 and 2021.[55][53]
2	Prince		0-4-0TT[note 7]	George England and Co.	1864[56][note 8]
			Prince was built in 1863 or 1864 for the Ffestiniog Railway and is the oldest FR locomotive still in operating condition. It has spent all of its working life on the FR, but in 2015 ran on a short length of 1 ft 11+1⁄2 in (597 mm) gauge track laid at Tywyn Wharf station as part of the TR's 150th anniversary celebrations.
(unnumbered)	Russell		2-6-2T	Hunslet Engine Co.	1906
			Built in 1906 for the NWNGR, Russell later ran on the Welsh Highland Railway. After the WHR closed in 1937 it moved to the Brymbo Ironworks railway and then in 1946 to Fayle's Tramway in Dorset. It was rescued for preservation in 1954 and between 1955 and 1965, Russell was on display as a static exhibit outside the Narrow Gauge Railway Museum at Tywyn. Since 1965 the locomotive has belonged the WHHR. It visited Tywyn again in 2015 as part of the TR's 150th anniversary celebrations.
3	Captain Baxter		0-4-0T	Fletcher, Jennings and Co.	1877
			A standard gauge locomotive, built in 1877 for the Betchworth Quarry Railways in Surrey. It is preserved by the Bluebell Railway in West Sussex.
2395	Stanhope		0-4-2ST	Kerr, Stuart and Co.	1917
			A 2 ft (610 mm) locomotive, built for the Penrhyn Quarry Railway. It is preserved by the Apedale Valley Light Railway in Staffordshire.
1135	Diana		0-4-2ST	Kerr, Stuart and Co.	1917
			A 2 ft (610 mm) locomotive, formerly on the Kerry Tramway. It is preserved by the Amerton Railway in Staffordshire.
9	Aberllefenni		4wBE	Clayton Equipment Company	1974
			A four-wheeled battery-electric locomotive from Aberllefenni quarry and now owned by the Corris Railway. It visited the Talyllyn in September 2023 as part of a heritage weekend.[50]

Close

The Talyllyn railway has a total of 23 carriages, with two more under construction As of 2024^[update]. The first five are the original carriages built for the railway, though they were not provided with numbers until preservation in 1951. After that time, the remaining carriages were built by the railway or acquired from elsewhere.^[58] With the exception of ex-Corris carriage No. 17, all the bogie coaches were built for the railway after preservation; the smaller four wheeled coaches are generally older.

All the stock is third class only, unless otherwise stated. Where two figures are given for the number of seats, the larger figure is the maximum number of passengers than can be carried in a heavily loaded train.

The Talyllyn Railway was primarily constructed for conveying slate. Prior to the beginning of the 20th century, the railway owned over 115 wagons,^[93] mainly slate wagons, but also a number of other general and special purpose goods wagons. Some of these survived into the preservation era, and since then a large number of additional wagons have been purchased and built. The following table lists the main types of wagon currently in use:

The Narrow Gauge Railway Museum is a purpose-built museum dedicated to narrow gauge railways situated on the Tywyn Wharf station. It owns several wagons formerly in use on the railway (listed above), as well as rolling stock and other artefacts from other narrow gauge railways around the world. The wagons are still used occasionally on the Talyllyn.

The standard livery for locomotives on the Talyllyn is deep bronze green,^[103] lined in black and yellow, although since the 1980s there has been a policy of varying some of the liveries for a period of time. Previously, No. 1 and No. 2 carried lined black and TR Crimson red liveries respectively. No. 2 Dolgoch had for a time carried Atlas green livery in preservation. No. 3 and No. 4 have carried Corris Railway Indian Red during certain times in Preservation. No. 4 had also carried Great Western Railway Middle Chrome Green, as well unlined British Railways black.

The liveries carried by the steam locomotives as of 2023 are as follows:-

• No. 1: Royal blue of the Great Eastern Railway.^[104]
• No. 2: Standard Talyllyn green with standard lining. Burnished motion and black background to builders/name/number plates.^[15]
• No. 3: Standard Talyllyn green with standard lining. Burnished motion and black background to builders/name/number plates.^[17]
• No. 4: Standard Talyllyn green with standard lining. Burnished motion and black background to builders/name/number plates.^[19] After overhaul it will return in Kerr, Stuart lined grey.^[105]
• No. 6: RAF blue.^[106]
• No. 7: Standard Talyllyn green with standard lining. Burnished motion and black background to builders/name/number plates.^[25]

The vintage rolling stock and the carriages built for the line after preservation are cherry red, lined with deep bronze green. Additionally, the railway has preserved rolling stock from other railways. These retain their original liveries.

The Corris coach (Talyllyn No. 17) and brake van (Talyllyn No. 6) are brown lined with gold leaf and the two Glyn Valley Tramway coaches (Talyllyn Nos. 14 and 15) are green lined with white.^[103]